Leupold Mark 8 3.5-25X56 (35mm) M5C2

MSRP: $3,899.99
$2,999.99
(You save $900.00 )
(No reviews yet) Write a Review
Availability:
Expected availability: 3-5 weeks
Weight:
36.00 Ounces

To hit your target, you have to find it first. Dial the Mark 8 3.5-25x56 down and it delivers a huge field-of-view that helps you see a large area. Crank the magnification up to deliver precise shots at any distance. And at only 32.5 ounces, you don’t have to pay a weight penalty for this level of performance. The Mark 8’s M5C2 ZeroLock elevation dial features a two turn zero-stop with a tactile revolution indicator providing 20 mils of travel (10 mils per revolution) and eliminates under or over rotating the dial. And with a 35mm maintube, it is the ultimate blend of versatility and rugged durability. This scope will immediately change your definition of “long range”.


These are the rifle scopes at the tip of the spear, first focal plane reticles, maximum resolution and field of view, 8:1 zoom range, and the image brightness and contrast necessary to triumph in the worst conditions.

 ITAR Restricted

Specifications

Weight (oz) 32.5
Linear FOV (ft/100 yd) - Low 32.0
Linear FOV (ft/100 yd) - High 4.7
Linear FOV (m/100 m) - Low 10.67
Length (in) 16.00
Linear FOV (m/100 m) - High 1.57
Length (cm) 40.6
Eye Relief (in) - Low 3.31
Eye Relief (in) - High 3.70
Eye Relief (mm) - Low 84
Eye Relief (mm) - High 94
Weight (g) 921
Elevation Adjustment Range (MOA) 90
Elevation Adjustment Range (MIL) 26.20
Windage Adjustment Range (MOA) 50
Windage Adjustment Range (MIL) 14.5
Exit Pupil (mm) - High 2.2

Dimensions

Length - A (in) 16.00
Illustration - C 1.72
Illustration - D 2.8
Eyepiece Length - E 3.3
Objective Length - F 5.96
Objective Diameter - G 2.7
Eyepiece Diameter - H 1.80
Tube Diameter- k (mm) 35.00
Mounting Space - B (cm) 16.3
Mounting Space - B (in) 6.4

 

Reticles

 

Front Focal Plane (FFP) TMR (Mk)

  • Expands on existing Mil Dot reticle design
  • Utilizes hash marks instead of dots for increased ranging and hold-over precision
  • Provides aiming points for both wind and bullet drop compensation
  • 1 MIL is approximately 3.6 inches at 100 yards
  • Hash marks are spaced .5 MILs apart, transitioning to .2 MIL spacing on the outer edges
  • Non-caliber specific
  • Front focal reticles enables full function of the holdovers throughout the whole magnification range
  • Mil based systems are the current military standard
 ffptmrmk.png

 FFP CCH

  • Proprietary Leupold Design
  • MIL based grid
  • Created with input from elite operators, shooters and hunters
  • Large number of aiming points for long range and extreme long range shots
  • Patented open intersections provide quick bracketing and precise shot placement
  • Moving target holds
  • Integrated measurement tool
  • Optimized at 12-16X for use with night vision and thermal
 cch-reticle-360x360.png

FFP H-59

  • Designed by Horus Vision with serious shooters in mind
  • Utilizes a MIL based system
  • Grid style reticle provides precise aiming points for bullet drop compensation and wind correction
  • Stepped lines above the horizontal post provide measurements in 0.1 MIL increments
  • Centralized dots at cross hair intersections for refined aiming points
  • Wider horizontal grid than it’s predecessor, the H-58
  • Open upper half of the reticle for observation and spotting
  • Large number of aiming points provides excellent corrections for follow-up shot placement
  • Numbered lines makes for quick line identification
  • Front focal reticles enables full function of the holdovers throughout the whole magnification range
 h59-380.png

 FFP Tremor 3

  • Designed by Horus Vision with serious shooters in mind
  • Utilizes a MIL based system
  • Grid style reticle provides precise aiming points for bullet drop compensation and wind correction
  • Centralized dots at cross hair intersections for refined aiming points
  • Chevron MIL markers measure 0.1 MILs for precise measurements
  • Increases number of hold over dots over the Tremor 2
  • Includes rapid ranging marks found on the H-59 reticle above the central horizontal line
  • Open upper half of the reticle for observation and spotting
  • Large number of aiming points provides excellent corrections for follow-up shot placement
  • Numbered lines makes for quick line identification
  • Front focal reticles enables full function of the holdovers throughout the whole magnification range
 tremor-3x16-360x360.png
See Leupold Warranty Information

Videos Hide Videos Show Videos